CG1-30 Gas Cutting Machine
The CG1-30 gas cutting machine is a highly efficient and reliable cutting tool. This machine is designed for precision cutting of various materials, including steel, iron, and other metals.
CG1-30 Gas Cutting Machine Detail Display
Products Description
The CG1-30 gas cutting machine is a highly efficient and reliable cutting tool. This machine is designed for precision cutting of various materials, including steel, iron, and other metals. It features a sturdy construction, ensuring durability and stability during operation. The CG1-30 is equipped with advanced gas cutting technology, allowing for clean and accurate cuts. The adjustable flame control enables users to customize the cutting intensity according to the specific material and thickness
Key Features
|
1. The main body is made of high-strength aluminum by diecasting minutely. |
5. A quick switch is attached to the pipe assembly for higher efficiency. |
| 2. The speed system is adjusted by controlled silicon. |
6. Mainly for straight line cutting and for circular cutting > Ø |
| 3. Oxygen-acetylene hose is made of high-quality rubber with advanced processes. |
7. Single torch cutting, groove range: I.Y.V (45 °) |
|
4. Attach quick connector for hose quick link. |
8. Applied in shipbuilding, oil production, metallurgy, metal structure and other manufactures, etc. |
Certification Marks:
Certified with CE and ISO 9001, ensuring compliance with international safety and quality requirements.
Product Information
| No. | Description |
| 1 | Hose: The three hoses are used individually for fuel gas, preheating oxygen and cutting oxygen |
| 2 | Cross-hand wheel: To adjust the horizontal distance of torch |
| 3 | Cross-gear rack |
| 4 | Vertical adjusting hand wheel of torch |
| 5 | Nozzle |
| 6 | Thermal baffle: To prevent the heat diffusing into the inner of machine |
| 7 | Fuel gas two-port valve: To adjust gas-flow rate |
| 8 | Gas distributor |
| 9 | Clutch hand knob: “STOP” is parting. “START” is combination |
| 10 | Body |
| 11 | Speed controller: Increase the speed from “0” to “10 Decease speed from “10” to “0” |
| 12 | Outlet |
| 13 | Universal wheel |
| 14 | Idle Wheel |
Parameter
| CG1-30 | |||
| Straight Rail Length | 1800mm | Torch No. | One flame |
| Circular Rail Diamater | 900/1000mm | Speed Control | Silicon control |
| Cutting Thickness | 5~100mm | Wheel Distance | 160mm |
| Dia. of Circle Cutting | 200-2000mm | Bevel Angle | I, Y, V (45°) |
| Cutting Speed | 50-750mm/min | Motor | DC 110V 50HZ 30W 4200r/min |
Advantages:
1. High cutting precision:
It is capable of delivering accurate cuts, ensuring clean and smooth edges on various materials. This precision is crucial for achieving professional results in fabrication and metalworking.
2. Versatility:
The machine can handle a wide range of materials, including steel, iron, and other metal. This makes it suitable for different applications in industries such as construction, shipbuilding, and manufacturing.
3. Reliable performance:
With its sturdy construction and quality components, the CG1-30 is designed for durability and long-term use. It can withstand heavy-duty operations and provide consistent cutting performance over time.
4. Easy to operate:
The gas cutting machine is user-friendly, with intuitive controls and simple setup procedures. Operators can quickly learn how to use it, reducing training time and increasing productivity.
5. Cost-effective:
Compared to some other cutting methods or more advanced machines, the CG1-30 offers a cost-effective solution. It provides reliable cutting capabilities without excessive investment, making it accessible for small and medium-sized businesses.
6. Portability:
The machine is often relatively lightweight and portable, allowing for easy transportation to different job sites. This flexibility is beneficial for contractors and those who need to perform cutting tasks in various locations.
Certificate
CG1-30 Gas Cutting Machine FAQ
Q1: What kind of products you made? Q2: May I have a look at your catalogue? Q3: What’s minimum quantity of an order of your goods? Q4: How long does it usually take you to make delivery? Q5: How can I choose a suitable Portable Gas Cutter? Q6:What shall we do if we don’t know how to operate the machine after purchase? Q7: What can we do if the machine has a problem? Q8:What is a gas cutting machine? A gas cutting machine is a tool used to cut through metals. It uses a fuel gas (such as acetylene) and oxygen to create a high – temperature flame. The intense heat melts the metal, and a jet of oxygen blows away the molten material, leaving a clean cut. Q9:What types of gases are used in a gas cutting machine? The most common fuel gas is acetylene. It burns with a very hot flame when combined with oxygen. Other fuel gases like propane and natural gas can also be used, but acetylene is preferred for its high heat output. Oxygen is always used as an oxidizer to support combustion and to blow away the molten metal. Q10:How do I set up a gas cutting machine? First, ensure that the gas cylinders (one for fuel gas and one for oxygen) are securely fastened in an upright position. Connect the hoses to the appropriate regulators on the cylinders and then to the torch. Adjust the regulators to set the correct gas pressures as recommended by the torch manufacturer. Usually, you need to purge the lines to remove any air before ignition. Q11:What safety precautions should I take when using a gas cutting machine? Wear appropriate personal protective equipment (PPE), including safety goggles, fire – resistant gloves, and a welding apron. Make sure the work area is well – ventilated to avoid inhaling fumes. Keep a fire extinguisher nearby and be aware of any flammable materials in the vicinity. Check for gas leaks regularly by using a soapy water solution on the connections. Q12:How do I maintain a gas cutting machine? Regularly clean the torch tip to remove any spatter or debris that can affect the quality of the flame. Check the hoses for any signs of wear or damage and replace them if necessary. The regulators should be calibrated periodically to ensure accurate gas flow. Also, store the gas cylinders in a cool, dry place when not in use. Q13:Can a gas cutting machine cut all types of metals? It can cut most ferrous metals (metals that contain iron), such as steel and cast iron. However, it may not be as effective for cutting non – ferrous metals like aluminum and copper. Special techniques or different equipment may be needed for non – ferrous metals due to their different thermal and chemical properties.
Our main productions are gas cutting machines, welding ovens and portable welding rod dryers.
Sure, you can send us mail ( [email protected]).
1) Cutting machine: 10 sets
2) Portable welding dryer: 100pcs.
3) Oven: 10 sets.
The item if have stock, we can send you immediately. And others need to check your qty, usually our delivery time is 15-30 days after receiving your payment. If the goods have stock, it can be fast delivery by ups or FedEx Express, like 3-9 days receive after payment.
Just tell us what kind of rail ttype do you need, straight line or circular rail?
We have detailed installation and operating instructions attached. It is very simple and we also have a 24-hour telephone and email support. And our engineers are also available for machinery service overseas but not for free.
24 hours timely response by email and phone calls or engineers overseas service but not for free.
- +8618858825816
- [email protected]
- No.39, Sitong Road, Zhuangquan Country, Tianhe Street, Wenzhou Economic And Technological Development Zone, Wenzhou City, Zhejiang Province, China
CG1-30 Gas Cutting Machine More About Reto
Company Profile
Application Areas
Packaging & Transportation
