CG1-2A Profiling Gas Cutting Machine
The CG1-2A H beam cutter is a specialized cutting tool designed for precision cutting of H beams.
Products Description
The CG1-2A H beam cutter is a specialized cutting tool designed for precision cutting of H beams.
This machine is equipped with advanced cutting technology that enables it to make clean and accurate cuts on H beams of various sizes. It has sturdy construction and is built to withstand heavy-duty use in industrial settings.
Key Feature
1. The main body is made of aluminum with a compact structure
2.Especially for H Beam and metal section, etc
3.Speed system is adjusted by silicon-controlled
4.Can be used for bevel and groove cutting
5.Applied to mechanical and metal structure plant, etc
Certification Marks:
Certified with CE and ISO 9001, ensuring compliance with international safety and quality requirements.
Product Information
|
No. |
Description |
No. |
Description |
|
1 |
Torch |
6 |
Reduce Speed Motor of Web Plate Cutting Equipment |
|
2 |
Gas hose: connected between torch and gas distributor to deliver gas |
7 |
Quick Distributor: Flame is adjusted only once and not adjusted again |
|
3 |
Adjusting Pilot Wheel for Transverse: It is to control torch transverse movement |
8 |
Handle: It is to move machine |
|
4 |
Track |
9 |
Track Pressure Plate: Locate machine on the H structural section |
|
5 |
Vertical Moving Bar |
10 |
Clutch Knob: Pulling knob (on the left side) is off; the pulling knob (on the right side) is on |
Product Parameter
| Model | CG1-2 | CG1-2A |
| Maximum Fly Past of Wing Plate Cutting | 150-400mm | 150-800mm |
| Maximum Fly Past of Web Plate Cutting | 150-800mm | 150-1600mm |
| Maximum Angle of Wing Plate Slanting Cutting | 30° (Max. Height of Slanting Cutting: 300mm) | 30° (Max. Height of Slanting Cutting: 690mm) |
| Maximum Angle of Web Plate Slanting Cutting | 35° (Maximum Length of Slanting Cutting: 400mm) | 35° (Maximum Length of Slanting Cutting: 1300mm) |
| Power Source | AC 220V±10% |
| Speed Control | SCR control |
| Cutting Speed | 50-750mm/min |
| Cutting Thickness | 5-50mm |
| Bevel Angle | 0-30° (Wing Plate; Web Plate) |
| Tip | G02 (for Acetylene) or G03 (for Propane) |
| Motor | 1) Web plate motor 110V 50HZ 30W, Rotational speed: 3600 rpm |
| 2) Wing plate motor 110V 50HZ 40W, Rotational speed: 2200 rpm |
Advantages:
1. High precision cutting: It can accurately cut H beams with minimal error, ensuring the integrity and quality of the cut. This precision is crucial for construction and fabrication projects where exact dimensions are required.
2. Versatility: capable of handling different sizes and types of H beams, making it a flexible tool for various applications. It can adapt to different project requirements and cut beams of varying thickness and widths.
3. Efficiency: The cutter is designed for quick and efficient cutting, reducing production time and increasing productivity. It can cut multiple beams in a short period, saving time and labor costs.
4. Durability: Built with high-quality materials and components, the CG1-2 H beam cutter is durable and can withstand heavy use. It has a long service life, providing a reliable cutting solution for years to come.
5. User-friendly operation: With intuitive controls and easy-to-use features, the cutter is simple to operate. Operators can quickly learn how to use it, minimizing training time and maximizing productivity.
6. Safety features: Equipped with safety mechanisms to protect operators from potential hazards. These features ensure a safe working environment and reduce the risk of accidents.
7. Cost-effective: offering a cost-effective cutting solution compared to other methods or tools. It can help businesses save on production costs while still achieving high-quality cuts.
Certificate
CG1-2A Profiling Gas Cutting Machine FAQ
Q1: What kind of products you made? Our main productions are gas cutting machines, welding ovens and portable welding rod dryers. Q2: May I have a look at your catalogue? Sure, you can send us mail ( [email protected]). Q3: What’s minimum quantity of an order of your goods? 1) Cutting machine: 10 sets Q4: How long does it usually take you to make delivery? The item if have stock, we can send you immediately. And others need to check your qty, usually our delivery time is 15-30 days after receiving your payment. If the goods have stock, it can be fast delivery by ups or FedEx Express, like 3-9 days receive after payment. Q5: How can I choose a suitable Portable Gas Cutter? Just tell us what kind of rail ttype do you need, straight line or circular rail? Q6:What shall we do if we don’t know how to operate the machine after purchase? We have detailed installation and operating instructions attached. It is very simple and we also have a 24-hour telephone and email support. And our engineers are also available for machinery service overseas but not for free. Q7: What can we do if the machine has a problem? 24 hours timely response by email and phone calls or engineers overseas service but not for free. Q8:What is a gas cutting machine? A gas cutting machine is a tool used to cut through metals. It uses a fuel gas (such as acetylene) and oxygen to create a high – temperature flame. The intense heat melts the metal, and a jet of oxygen blows away the molten material, leaving a clean cut. Q9:What types of gases are used in a gas cutting machine? The most common fuel gas is acetylene. It burns with a very hot flame when combined with oxygen. Other fuel gases like propane and natural gas can also be used, but acetylene is preferred for its high heat output. Oxygen is always used as an oxidizer to support combustion and to blow away the molten metal. Q10:How do I set up a gas cutting machine? First, ensure that the gas cylinders (one for fuel gas and one for oxygen) are securely fastened in an upright position. Connect the hoses to the appropriate regulators on the cylinders and then to the torch. Adjust the regulators to set the correct gas pressures as recommended by the torch manufacturer. Usually, you need to purge the lines to remove any air before ignition. Q11:What safety precautions should I take when using a gas cutting machine? Wear appropriate personal protective equipment (PPE), including safety goggles, fire – resistant gloves, and a welding apron. Make sure the work area is well – ventilated to avoid inhaling fumes. Keep a fire extinguisher nearby and be aware of any flammable materials in the vicinity. Check for gas leaks regularly by using a soapy water solution on the connections. Q12:How do I maintain a gas cutting machine? Regularly clean the torch tip to remove any spatter or debris that can affect the quality of the flame. Check the hoses for any signs of wear or damage and replace them if necessary. The regulators should be calibrated periodically to ensure accurate gas flow. Also, store the gas cylinders in a cool, dry place when not in use. Q13:Can a gas cutting machine cut all types of metals? It can cut most ferrous metals (metals that contain iron), such as steel and cast iron. However, it may not be as effective for cutting non – ferrous metals like aluminum and copper. Special techniques or different equipment may be needed for non – ferrous metals due to their different thermal and chemical properties.
2) Portable welding dryer: 100pcs.
3) Oven: 10 sets.
- +8618858825816
- [email protected]
- No.39, Sitong Road, Zhuangquan Country, Tianhe Street, Wenzhou Economic And Technological Development Zone, Wenzhou City, Zhejiang Province, China
CG1-2A Profiling Gas Cutting Machine More About Reto
Company Profile
Application Areas
Packaging & Transportation
